Skip to content

VTL 30 L

Ace Vertical Turning Center combine power, rigidity and versatility with increased capacity. Wide access to the chuck zone facilitates ease of loading and unloading of parts. Rapid traverse rates of 20m/min reduce cycle times. Linear motion guideways on X & Z axes ensure better positioning and repeatability.

This machine is ideal for turning heavy, large diameter components like fly wheels, brake drums, big size gears, etc. The machine is conducive for easy loading and unloading of heavy components. This machine occupies smaller floor space than a horizontal turning machine that can turn comparable sized parts.

Standard Features

  •  Cartridge type spindle
  •  AC spindle drives and axes drives
  •  High speed bi-directoral tool Turret
  •  Heavy duty LM Guideways
  •  Automatic centralised oil lubrication
  •  Built-in lighting system
  •  Hydraulic Counter Balance System for Z axis
  •  Torque enhancement by Star-delta
  •  (Optional for VTL-30 / VTL-30/700)
  •  Overload trip clutches on both axes
  •  Basic hydraulic system
  •  Coolant system with rear chip tray
  •  OD turning tool blocks (8 Nos)
  •  Facing tool holders (2 Nos)
  •  Set of sleeves for boring bars

Optional Features

  •  Fully tooled up solutions to meet customer needs
  •  Chip conveyor at rear only
  •  A wide variety of power operated work- holding (chucks, collets, fixtures, etc) and tooling
  •  12 station Turret
  •  Auto door
  •  ZF Gearbox
ModelUnitsVTL 30
Swing Over Bedmm800
Swing over carriagemm240
Maximum Turning Diamm500
Maximum Turning Lengthmm500
Spindle Size / Nose A2-8
Bore through Spindlemm47
Max.Spindle Speedrpm50 - 2500 rpm
Spindle Motor Power_Fanuc : (continuos)kW18.5
Spindle Motor Power_Fanuc: (30 min)kW22
Spindle Motor Power_Siemens: (continuos)kW-
Spindle Motor Power_Siemens: (S6-40 %)kW-
Full Power Range -FANUCrpm320 – 1920
Full Power Range -Seimensrpm-
Standard Chuck SizemmRefer Quote
X-Axis strokemm265
X-Axis Rapidm/min20
X-Axis Guideways Heavy duty LM guide ways
Z-Axis strokemm500
Z-Axis rapidm/min20
Z-Axis Guideways Heavy duty LM guide ways
Turrret Type BTP-125
No of Stations 8
Max.Boring Bar Diamm40
OD Turning Tool Sizemm25x25
Coolant System
Coolant Tank Capacityl (litre)200
Hydraulic System
Hydraulic Pump Capacitylpm14
Hydraulic Power Pack Tank Capacityl (litre)15
Overall  Dimensions (LxWxH)mm1840 X 2210 X 2950
Overall Weight (without packing)Kg~ 7000

Specifications correct at the time of print. Owing to continuous up-gradation of our products, the specification may change and to be reconfirmed at the time of ordering.

1 Refer machining range diagram
2 With Appropriate work holding

a. Figures in bracket are optional.
b. Siemens 828D Basic T can also be offered. Details on request.
c. Features shown may not be part of the standard equipment.

VTL 30 L