LTP-2 LM 500
Machine Specifications
Product(s) LTP-2-LM-500-(L) cannot be compared against below products.
| Model | Units | LTP-2-LM-500 |
|---|---|---|
| Capacity | ||
| Swing Over Bed | mm | 500 |
| Swing over carriage | mm | 225 |
| Maximum Turning Dia | mm | 320 |
| Maximum Turning Length | mm | 500 |
| Distance between centres | mm | NA |
| Spindle | ||
| Spindle Size / Nose | ||
| Max.Bar Capacity | mm | NA |
| Bore through Spindle | mm | 86/110/130/160/180 |
| Max.Spindle Speed | rpm | 50-1500 |
| Spindle Motor Power_Fanuc : (continuos) | kW | 5.5 |
| Spindle Motor Power_Fanuc: (30 min) | kW | 7.5 |
| Spindle Motor Power_Fanuc: (15 min) | kW | NA |
| Spindle Motor Power_Siemens: (continuos) | kW | NA |
| Spindle Motor Power_Siemens: (S6-40 %) | kW | NA |
| Full Power Range -FANUC | rpm | Depends on Spindle Bore |
| Full Power Range -Seimens | rpm | NA |
| Standard Chuck Size | mm | refer quote |
| Axes | ||
| X-Axis stroke | mm | 165 |
| X-Axis Rapid | m/min | 30 |
| X-Axis Guideways | LM Guideways | |
| Z-Axis stroke | mm | 500 |
| Z-Axis rapid | m/min | 30 |
| Z-Axis Guideways | LM Guideways | |
| Tooling | ||
| Turrret Type | ||
| No of Stations | 8 | |
| Max.Boring Bar Dia | mm | 40 |
| OD Turning Tool Size | mm | 25x25 |
| TailStock | ||
| TailStock Base Travel | mm | NA |
| TailStock Quill Dia | mm | NA |
| TailStock Quill Taper | NA | |
| Coolant System | ||
| Coolant Tank Capacity | l (litre) | NA |
| Hydraulic System | ||
| Hydraulic Pump Capacity | lpm | NA |
| Hydraulic Power Pack Tank Capacity | l (litre) | NA |
| Overall Dimensions (LxWxH) | mm | 2200x1750x1750 |
| Overall Weight (without packing) | Kg | ~3500 |
*Optional
Owing to continuous up-gradation of our products, the specification may change and to be reconfirmed at the time of ordering.