Skip to content


  •  Rigid bed
  •  Precision Linear motion guideways on both the axes
  •  Cartridge type robust spindle
  •  8 station turret
  •  Tailstock with hydraulic quill actuation
  •  20 m/min rapid rates both axes
  •  Compact foot print
  •  Ideal for cell manufacturing layout
  •  Maintenance friendly

Standard Features

  •  AC spindle & axes drives
  •  Hardened & Ground ā€˜Vā€™ & Flat type Guideways
  •  Bi-directional tool turret
  •  Tailstock with live center
  •  Automatic centralized oil lubrication
  •  Hydraulic power chuck Ƙ135 mm
  •  AC unit for electrical Cabinet
  •  Built-in lighting system
  •  Coolant system
  •  Drain line oil cooler
  •  Basic hydraulic system
  •  OD turning tool holder (8 nos)
  •  Boring bar holder (4 nos)
  •  Facing tool holder (2 nos)
  •  Set of sleeves

Optional Features

  •  Chip Conveyor- Rear mounting only
  •  Parts catcher
  •  Bar Feeder
ModelUnitsCUB LM
Swing Over Bedmm450
Swing over carriagemm125
Maximum Turning Diamm140
Maximum Turning Lengthmm200
Distance between centresmm280
Spindle Size / Nose Flat 110 (A2-5)
Max.Bar Capacitymm25*
Bore through Spindlemm36
Max.Spindle Speedrpm4000
Spindle Motor Power_Fanuc : (continuos)kW3.7
Spindle Motor Power_Fanuc: (15 min)kW5.5
Spindle Motor Power_Siemens: (continuos)kW3.7
Spindle Motor Power_Siemens: (S6-40 %)kW5.5
Full Power Range -FANUCrpm1333-3000
Full Power Range -Seimensrpm1000-4000
Standard Chuck Sizemm135
X-Axis strokemm87
X-Axis Rapidm/min20
X-Axis Guideways LM guide ways
Z-Axis strokemm200
Z-Axis rapidm/min20
Z-Axis Guideways LM guide ways
Turrret Type BTP 63
No of Stations 8
Max.Boring Bar Diamm32
OD Turning Tool Sizemm20X20
TailStock Base Travelmm270
TailStock Quill Diamm50
TailStock Quill Travelmm120
TailStock Quill Taper MT 4
Coolant System
Coolant Tank Capacityl (litre)150
Hydraulic System
Hydraulic Pump Capacitylpm12
Hydraulic Power Pack Tank Capacityl (litre)20
Overall  Dimensions (LxWxH)mm1900X1225X1880
Overall Weight (without packing)KgApprox. 2200

Specifications correct at the time of print. Owing to continuous up-gradation of our products, the specification may change and to be reconfirmed at the time of ordering.

1 Refer machining range diagram
2 Refer Interference diagram
3 With Appropriate work holding

Note: Features shown may not be part of the standard equipment.